ML60852A

ML60852A
USB Device Controller

Documents

» PDF of this Data Sheet (471 KB) is available.

ML60852A.pdf

»	Application Manual. ML60852A

»	The CAB60852 conveniently assembles the ML60852 USB device controller.. ML60852/CAB60852 User Board

»	The JOB60852 board features an Oki original MSM66573 16-bit MCU. ML60852A/JOB60852 Starter Kit

»	Frequently Asked Questions. FAQs for USB ICs

Description

The ML60852A is a general purpose Universal Serial Bus (USB) device controller. The ML60852A provide a USB serial interface engine, USB transceiver, FIFOs, control/status registers, application interface circuit, and oscillation circuit thereby easily realizing a USB system. The ML60852A supports four types of data transfer such as control transfer, bulk transfer, interrupt transfer and isochronous transfer, and also supports five or six endpoints.

Features

USB1.1 compliant

Supports full-speed (12 Mbps).

Supports four types of transfer; control transfer, bulk transfer, interrupt transfer, and isochronous transfer.

Endpoints: 5 to 6 endpoints

»	Control EP 1
»	Bulk/interrupt EP 3
»	Isochronous/bulk/interrupt EP 1 or 2

Built-in FIFO for data storage

A two-layer configuration of FIFO for each of EP1, EP2, EP4, and EP5

8/16 bit DMA supported (EP1, EP2, EP4, and EP5).

Intelligent Serial Interface Engine (SIE)

Supports bus-powered device. The suspend condition is automatically detected and the low-power mode is activated. Normal operation is automatically restarted when the resume condition is detected.

Built-in USB transceiver circuit

V_CC =3.0 to 3.6 V

Interface with 5 V circuit is possible. (Input: 5 V tolerant, output: TTL)

Built-in 12 MHz/ 6MHz oscillation circuit

Package options:
44-pin plastic TQFP
56-pin plastic LGA